Allen TX homeowners are always resourceful and capable. True enough, DIY is a mantra for most homeowners, which is why most want to know how to install a house with metal roofing effectively.
Installing corrugated metal roofing and standing seam metal isn’t quite complicated as some may think. Indeed, it is time consuming and requires much equipment to carry out. However, the logic is easy to follow especially with clear-cut instructions.
In this short “metal roofing for dummies” type guide, you’ll learn how to roof a house with metal roofing, and these steps apply when installing metal roofing on a shed.
How to Install Metal Roofs
- Measure Your Roof
- Prepare the Work Area
- Tear Off Your Old Roof
- Repair Any Roof Deck Damage Present (+6 more tips)
Easy Steps on How to Roof a House With Metal Roofing
Measure Your Roof
Architects perform precision measurements and undergo several revisions before they have a final draft of any work. In the same vein, you must have an accurate picture of your roof’s dimensions. It is an essential part on how to roof a house with metal roofing.
Here are the important roof areas to measure:
- Roof Slope: Almost all Allen TX residential properties have a high-slope roofing style. Measure it according to the height of your roof ridge over the edges or gutter area.
- Roof Area: You can calculate this by measuring the length and width of your roof and multiplying it by the slope. The figure you get is the total square feet of materials and area you need to cover.
Prepare The Work Area
Most DIY homeowners forget to secure damage prone areas around their property, which is an essential step on how to roof a house with metal roofing.
Set tarpaulins along your front yard and your roof’s surrounding ground area. Next, position a large garbage can or dedicated tarpaulin to contain all waste materials from the roof tear off process.
Prepare a place for your tools. Additionally, wear a tool belt and make sure your scaffolding is at the same height as your roof. Have a ladder handy on the area opposite of your scaffolding.
Tear Off Your Old Roof
Before you can practice how to roof a house with metal roofing, you’ll need to remove your old one carefully. To do this, you’ll need a pry bar, hammer, and gloves.
Carefully lift your old roofing material to loosen their nails and cement. Next, use the hammer to remove the nails. Take care to put them in your dedicated nail container or tarpaulin area on the ground.
Work from the ridge of your old roof heading downwards. Carefully remove the materials to avoid any deck damage. Lastly, only do this during sunny or cloudy days without any rains or moisture.
Repair Roof Deck Damage if Any
Once you expose your roof bare of its material and underlayment, you’ll find some areas of your old roof deck plywood suffering from rot due to moisture or infestation. Just like removing your old roofing materials, remove the plywood sheathing with a pry bar and its nails with the hammer’s nail remover.
Luckily, most plywood sheathing is easy to repair because of its fixed dimensions for most homes. In addition, a square of plywood only costs about $1 with most retailers.
Once you’ve made the purchase and are ready to replace your old sheathing, clean the joist areas (and replace weakened ones too) before installing your sheathing and new underlayment across the roof.
Install Eave Flashings
Edgings or eave flashings seem unnecessary, but that wooden space between your roof edge and gutters will rot faster due to moisture without these oxidized metal strips. Before making a purchase, have the most accurate measurements of your roof’s length and width to avoid paying extra (although you must have a 10% material surplus for any errors during the process).
You can use 1/4 inch nails to secure the flashing. In addition, make sure they overlap your gutters to prevent any internal drip edge leakage.
Put In Metal Panels
The heart of this process, installing your metal panels take the longest time and most effort, so make sure you’ve prepared everything. Else, you might have to start this entire process should you make an error.
Take the first corrugated metal sheet or standing seam panel and bring it up to your roof. Make sure it is perpendicular to the edge of your roof.
Next, mark the screw areas across your underlayment with chalk and align them according to your roof panel. If your panels have the same size, you can use one metal sheet to mark and drill screw holes across your roof. Make sure to give a 12-inch space between each screw as minimum.
Add Extra Flashings
Add metal flashings across the joints of your roof. Doing so helps prevent leakage and helps with insulation.
True enough, your roof joints will have a V-shape, and you can bend your flashing into a V to fit your roof ridges. Next, use screws instead of hammered nails to secure your extra flashing in place.
Related: How Hard Is It To Do DIY Roofing?
Installing Metal on Specific Types of Roofs
How to Install Metal Roofing Over Plywood That is Old
You can proceed with all the steps except tearing off your roof deck if your roof sheath and underlayment was still intact or has minimal damage when you removed your old roof shingles. On the other hand, make sure to repair any damages and secure compromised underlayment before starting construction.
Installing a Metal Roof Over Shingles
You can save more time by installing metal roofs over your old shingle roofs. Local Allen TX building codes allow for at least two layers of roofing materials. However, you’ll be using a new truss framework to keep your corrugated or standing seam metal roofing in place — and this takes time to construct.
Save Time and Hassle Installing Your New Metal Roofs
True enough, it takes time to know how to roof a house with metal roofing and eventually accomplish it. Fortunately, you won’t have to struggle making time, getting the right equipment and materials, and installing your new roofs.
Storm Pros is here to help any Allen TX homeowner re-roof their property with superior metal roofing material. With decades of experience in the industry and a team of knowledgeable and solution-oriented roofers, we can definitely deliver the high caliber of residential roofing you need. Contact us today!